Conventional and High Definition CNC Plasma Table Systems

Conventional CNC Plasma Table Systems

Entry Level Plasma Table System

Light Duty Conventional CNC Plasma Cutting System

Entry Level tables are a light-duty CNC plasma cutting system based on regular heavy-duty industrial systems. The dual-side drive system is constructed of 10-gauge steel. They feature a welded tub with a solidly mounted gantry on top and is a complete turn-key unit: controllers and plasma are installed and tested prior to delivery.

Features

• Hypertherm EDGE Connect.
• 10ga walls.
• C4 Frame.
• Water or downdraft.
• Adjustable water level.
• 4×8, 5×10, 6×12

Unitized Plasma Table System

Water Table or Down Draft in Conventional or High Definition

Unitized CNC plasma systems contains a work table that has a structural double frame with a welded 3/16″ walled tub built on a W4x13 frame to withstand the industrial environment. Heavy ‘T’ guide rails, helical gear rack with 2″ steel rollers on the rail axis combined with dual linear slides on the cross axis make a smooth and accurate guide system.

Features

• 3/16″ walls.
• W4 Beam Frame.
• Water or downdraft.
• Adjustable water level.
• Hypertherm EDGE Connect.
• 5×10 to 8×20

High Definition CNC Plasma Table Systems

Rail & Gantry Plasma Table System

High Definition Plasma Tables in any size from 5’ x 10’ to 14’ x 30’

Rail & Gantry systems include True Hole, which was designed from the ground up to give you the best possible plasma-cut hole. Each industrial CNC Rail System is built in house and ships complete, with plasma cutter and controller installed and fully tested prior to shipment.

Features

• 3/16″ Walls.
• W4 Beam Frame.
• Water or downdraft.
• Adjustable water level.
• Buyer-built work table option.
• 5×10 to 10×30

Bridge Plasma Table System

Fully Integrated High Definition Industrial CNC Plasma System

Bridge systems represent the best in plasma cutting technology and are completely integrated from top to bottom, featuring all Hypertherm components, software and True Hole. Integrated automatic torch height control, torch collision protection, laser locator and full motion Hypertherm Phoenix software are standard features. Bridge Systems use a minimum of three 750-watt servos. Motor sizes increase as width and length dictate.

Features

• 1/4″ Walls.
• W6 Beam Frame.
• Water or downdraft.
• Adjustable water level.
• Buyer-built work table option.
• 5×10 to 20×100.